Cross-Connection Control Program

Cross-Connection Control Program

Ensuring Clean, Safe Drinking Water and Regulatory Compliance is Flint's top priority.

For years, Flint has complied with an important Regulatory Water Safety Compliance Program known as Cross-Connection Control.

This State Mandated Program focuses on non-residential (commercial) water service connections and onsite visual inspections (coordinated and performed by HydroCorp of Troy, MI) to identify potentially harmful interconnections to the Flint Public Water Supply.

Commercial FAQs

An Important Community-Wide Safety Project

Michigan Department of Environment, Great Lakes and Energy (EGLE) requires Public Water Systems to implement a Cross-Connection Control Program to protect all Water Service Connections.

This web page serves to assist Flint Water Customers with their participation in this important safety program. The city has selected HydroCorp to assist with Coordination, Site Visits, and Data/Compliance Management.

HydroCorp sends postal notice of upcoming Cross-Connection Inspection. Toll-Free hotline number provided for FAQ.

HydroCorp hired by local water purveyor to assist with CCC Program.

Facility owners have the option to coordinate the date of onsite inspection by HydroCorp.

Cross-Connection Surveyor arrives with I.D. and conducts survey/inspection with permission by owner/occupant.

Surveyor documents existing and any potential corrective actions, explains next step responsibilities to owner. Corrective actions instructions are also mailed via postal to building owner with compliance due date.

Water Customer/Owner contacts HydroCorp when corrections are made and onsite compliance inspection is scheduled.

HydroCorp hired by local water purveyor to assist with CCC Program.

HydroCorp sends postal notice of upcoming Cross-Connection Inspection. Toll-Free hotline number provided for FAQ.

Facility owners have the option to coordinate the date of onsite inspection by HydroCorp.

Cross-Connection Surveyor arrives with I.D. and conducts survey/inspection with permission by owner/occupant.

Surveyor documents existing and any potential corrective actions, explains next step responsibilities to owner. Corrective actions instructions are also mailed via postal to building owner with compliance due date.

Water Customer/Owner contacts HydroCorp when corrections are made and onsite compliance inspection is scheduled.

Commercial Facility Water Customers

Cross-Connection and Backflow FAQ

PART I: INSPECTIONS / SURVEYS

A cross-connection is an actual or potential connection between the safe drinking water (potable) supply and a source of contamination or pollution. State plumbing codes require approved backflow prevention methods to be installed at every point of potable water connection and use. Cross-Connections must be properly protected or eliminated.

HydroCorp has been contracted by Flint to assist with their Cross-connection Control (CCC) Program. The CCC program includes two parts: On site inspections and testing of backflow prevention assemblies. The HydroCorp inspector will be conducting a visual inspection of the water uses outside of your facility (outside spigots, lawn irrigation system, secondary sources of water, pools, etc.) to identify cross-connections that could possibly contaminate your drinking water or the public water supply. If your water provider requires an inspector to enter your facility to evaluate other cross-connection and plumbing hazards inside your facility, you will be notified and instructed to schedule an appointment for your inspection.

Hose Connection Vacuum Breaker Video

Residential Cross-Connection Control Survey | Exterior from HydroCorp on Vimeo.

All water customers connected to the public water supply are required to be inspected for cross-connections and will be inspected in due time.

An average inspection normally takes from 30 to 45 minutes, depending on the size of your facility/property.

If you received a letter informing you/the facility of an upcoming cross-connection inspection, please arrange for the appropriate manager/person is aware of the planned inspection. Access will be necessary for the inspector to visually observe all exposed hot/cold potable water plumbing connections.

Yes. We just need a name and number so that the inspector can contact you to set up a time that is convenient for you.

If you are the owner of the facility being inspected, you are responsible for any needed repairs. Renters may have to refer to their lease agreements in order to determine whether they are responsible for repairs.

All HydroCorp inspectors wear photo ID badges during inspections and are prepared to provide appropriate documentation verifying their identities.

Yes. These inspections are conducted in order to ensure compliance with state regulations to maintain the safety of your drinking water.

Penalties for refusing to cooperate with inspections and/or refusing to make needed repairs are determined by your local water utility. These typically can include termination of water service, a fine, or both.

PART II: BACKFLOW PREVENTION ASSEMBLY TESTING

Just like any other mechanical device, backflow prevention assemblies are prone to wear and tear, and do break down from time to time. Regular testing is required in order to ensure that your device remains in proper working order.

As required by Michigan Uniform Plumbing Code, backflow Prevention assemblies connected to Non-Residential plumbing shall be tested annually by an ASSE Certified Tester. If you are injecting chemicals into your lawn irrigation system, state regulations and plumbing codes require the backflow preventer to be tested on an annual basis.

There are two parts to the Cross-connection Control Program. The first is an on site inspection by a cross-connection control inspector to ensure that the proper backflow prevention devices and assemblies are in place to protect your drinking water. Some of the assemblies the inspector finds or asks you to install are testable assemblies, which are mechanical and can malfunction. The testing notice refers to testing the operation of these backflow prevention assemblies. These tests must be performed by a certified tester.

“Grandfathering” is not typically permitted due to the high importance of maintaining drinking water safety. Just like any other mechanical device, backflow prevention assemblies are prone to wear and tear, and do break down from time to time. Regular testing is required in order to ensure that your device remains in proper working order.

PART III: GENERAL RESOURCES

The anti-siphon fill valve device is located in the tank of your toilet. This device has a dual purpose: To fill the toilet and prevent backflow. This device must be placed at the proper height in order to insure that water from your toilet does not backflow into your drinking water. Proper placement is typically done during the installation process but can be easily overlooked. This device must be raised or the overflow pipe must be cut down in order to achieve a 1” air gap separation between the “critical level” of the assembly.

Click here to see an installation diagram.

Click here for 3 minute video overview.

Example: Hose connection vacuum breakers

 

Example: Integrated vacuum breaker on outside hose spigot.

Example: Hose end in bucket

 

Example: Hose end in pool

 

 

 

Vacuum breaker should not be subject to continuous pressure like the example here illustrates. (This type of irrigation set up/system would need to be corrected.)

These require periodic performance testing by a Certified Tester. 

Pressure Vacuum Breaker Assembly

 

Reduced Pressure Principle Backflow Prevention Assembly

Search for Backflow Tester

5700 Crooks Road, Suite 100
Troy, MI 48098
(844) 493-7641

www.hydrocorpinc.com